Description
The Shurflo 40×9 series of pumps is intended to upgrade and replace the pre-existing 2095 series. The 40×9 freshwater pump design was created with a unique one-piece diaphragm and internal bypass (on applicable models), supporting pump life and performance in all plumbing systems.
Designed as the next generation pump to exceed the expectations of customers, the 40×9 series pump is constructed for high flow demand, dampened vibration noise, and elimination of rapid cycling.
All Shurflo 40×9 series models support key regulations in the European Caravan/RV market,
including Electromagnetic Compatibility with the E8 mark and German drinking water by using all KTW-BWGL compliant wetted materials.
- 4 independent pump chambers give a smooth even flow
- Elasformer base plate*
- Adjustable pressure shut-off micro switch
- Thermal overload protection
- 12v DC3” diameter motor – built for power – built to last
- Prime: 2.7M (9’)
- Run dry: Yes
- Fits same installation space as 2095 series pumps
- Dampened noise
- 2 year limited warranty
- Weight: 1.8Kg
- Flow rate 2.0 GPM (7.6 LPM)
- Pressure: 20 PSI* (1.4 BAR)
- Dimensions (LxWxH): 205 x 125 x 111mm
*NOTE: This model with Elasformer Base Plate – will not directly fit the same base footprint as the 2095 series and 40×9 series with metal base, as the screw hole centres are different (73x83mm) instead of (57x81mm)
Note: Do not use tape or sealing compounds on threads. Sealant may enter the pump and cause failure. Failure due to foreign material is NOT covered under warranty.
Shurflo 4029 Series Pumps Information Sheet (Rubber Base Model)
Reviews
There are no reviews yet.