Description
Nut in Tank Fitting with backnut and washer 3/4bsp thread with 3 stepped hose barbs 25, 19 & 12mm. The fitting can be cut down to each size to increase to the correct bore of the Hose Barb.
Used to add a hose connection to fresh and waste water tanks. Simple cut a suitably sized hole in the tank wall, insert the fitting and washer from outside with a smear of silicone sealant to the joint, add nut to inside and tighten up. Add hose to the barb of the hose fitting and secure with an HC hose clip.
Reviews
There are no reviews yet.