Description

Good Quality Replacement Wheel Bolts

These Wheel Bolts are suitable for the following Volkswagen Models with Alloy and Steel Wheels

Beetle (New) – 1999 onwards

Bora – 1998 to 2005

Caddy – 2004 onwards

Corrado (V6 MODEL ONLY) – 1991 to 1996

EOS – 2006 onwards

Fox – 2005 onwards

Golf MK3, 4, 5, 6 & 7 – 1991 to 2016

Jetta MK3,4 & 5 – 1992 onwards

Passat B5 B6 B7 B8 & CC – 1996 to 2016

Phaeton – 2002 onwards

Polo MK4, 5 & 6 – 2000 onwards

Scirocco (New) – 2008 to 2016

Touran – 2005 to 2016

Technical Specification

Anodized Finish Bolt, M14x1.5mm Thread Length 28mm to Radius Seat, overall Length 52mm, Radius Seat type (R13) This Bolt uses a 17mm Socket/Wrench

Important Information

Always compare the seating and thread with the original equipment fitted, The Manufacturer Strongly recommends that each installation should be inspected during fitment and thoroughly checked after fitment (by spinning the wheel if necessary) after 200 miles or 300km use. Torque settings should be in accordance with vehicle manufacturers recommendations. If you are unsure about any aspect of fitting do not attempt to fit but contact your local dealer. Your wheel hubs or brakes may be adversely affected by wrongly fitted wheel nuts. Do not use air guns to fit.